Panasonic KXTG4321 - Manual (Page 38)

Intercom/Locator
38 For assistance, please visit http://www.panasonic.com/help
Intercom
Intercom calls can be made:
– between handsets.
– between the handset and base unit.
Note:
L
If you receive an outside call while
talking on the intercom, you hear 2
tones.
To answer the call with the handset,
press {OFF}, then press {C}.
L When paging unit(s) for an intercom
call, the paged unit(s) beeps for 1
minute.
Making an intercom call
1
{ INTERCOM}
2
{V} /{^}: Select the desired unit. i
{ Select}
L To stop paging, press {OFF}.
3 When you finish talking, press
{
OFF}.
1
{ INTERCOM}
L
All registered handsets beep.
L To stop paging, press
{
INTERCOM}.
2 When you finish talking, press
{
INTERCOM}.
Answering an intercom call
1 Press {C} to answer the page.
2 When you finish talking, press
{
OFF}.
1 Press {INTERCOM} to answer the
page.
2 When you finish talking, press
{
INTERCOM}.
Note:
L
When the ringer volume for outside
calls is set to off (page 16, 23), the
handset and/or base unit rings at a
low level for intercom calls.
Transferring calls,
conference calls
Outside calls can be transferred
between 2 handsets. 2 handsets can
have a conference call with an outside
party.
1 During an outside call, press
{
INTERCOM} to put the call on hold.
2
{V}
/{^}: Select the desired unit. i
{ Transfer}
3 Wait for the paged party to answer.
L
If the paged party does not
answer, press {C} to return to
the outside call.
4 To complete the transfer:
Press {OFF}.
L
The outside call is being routed to
the destination unit.
To establish a conference call:
Press {Conf}.
Handset
Base unit
Handset
Base unit
TG43xx_OI.book Page 38 Tuesday, December 11, 2007 2:04 PM