Auto talk, Key tone – Panasonic KXTG4321 User Manual
Page 23
Programming
23
For assistance, please visit http://www.panasonic.com/help
*1 If “System setting” column is checked, you do not need to program the same item
using another handset.
*2 If you subscribe to Caller ID service and want to view the caller’s information after
lifting up the handset to answer a call, turn off this feature.
*3 Turn this feature off if you prefer not to hear key tones while you are dialing or
pressing any keys, including confirmation tones and error tones.
*4 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone
(tone 1 to 3). If you select a melody, you cannot distinguish lines by their ringers.
*5 If you select one of the melody ringer tones, the ringer tone will continue to play for
several seconds even if the caller has already hung up. You may either hear a dial
tone or no one on the line when you answer the call.
*6 The flash time depends on your telephone exchange or host PBX. Contact your
PBX supplier if necessary. The setting should stay at “700ms” unless pressing
{
FLASH} fails to pick up the waiting call.
Ring count
{
2}{1}{1}
{
2}–{7}: 2–7 rings <4>
{
0}: Toll saver
r
Ringer tone
(Handset)
{
1}{6}{1}
{
1}–{3}: Tone <1>–3
{
4}–{7}: Melody 1–4
–
–
Ringer volume
(Handset)
{
1}{6}{0}
{
1}: Low {2}: Medium
{
3}:
–
–
Set dial mode
{
1}{2}{0}
{
1}: Pulse
{
2}: <Tone>
r
Set flash
time
{
1}{2}{1}
{
1}: <700ms>
{
2}: 600ms
{
3}: 400ms
{
4}: 300ms
{
5}: 250ms
{
6}: 110ms
{
7}: 100ms
{
8}: 90ms
r
{
1}{2}{2}
{
1}: A {2}: <B>
r
–
Store VM
access#
{
3}{3}{1}
–
r
Time
adjustment
(Caller ID
subscribers only)
{
2}{2}{6}
{
1}: <Caller ID
[auto]>
{
0}: Manual
r
–
V.M. access
{
3}{3}{0}
–
–
VM tone detect
{
3}{3}{2}
{
1}: <On> {0}: Off
r
Voice prompt
(Change language)
{
1}{1}{2}
{
1}: <English>
{
2}: Español
r
Feature
Feature
code
Setting code
System
setting
*1
Page
TG43xx_OI.book Page 23 Tuesday, December 11, 2007 2:04 PM