Philips AJ6110 - Manual (Page 8)

8
English
Installation
Mounting the set under a
cabinet
Preparation
● Ask a friend to help out. An extra hand to hold
the set makes mounting easier and quicker.
● You may install the unit in the kitchen with or
without spacers.
a Find a mounting location near a wall outlet.
b Use the mounting template to test the design
and thickness of your kitchen cabinet bottom.
Mounting the set
For full details on how to use the Mounting kit,
please refer to the printed instructions in the
Quick Start Guide and Template.
IMPORTANT!
– Never plug in the AC power cord to
the power outlet before installation is
completed.
– Install your set near the AC outlet and
where the AC power plug can be reached
easily
– Do not use a converter or extension
cord.
- Install the set as far as possible from
sources of interference, such as a
refrigerator, microwave oven, fluorescent
lamp, etc.
– There should be at least 2.5" distance
between the unit and the wall.
– To reduce the risk of fire, do
not place any heating or cooking
appliance beneath the set.
– To prevent obstruction or
danger, use the power cord posts
to wrap the power cord so that
excess cord does not hang down.
Power supply
This set runs on AC power.
We recommend you also inser t a 9V battery for
memory back-up power supply. In the event of a
power interruption, this will help safeguard the
clock, timer settings and preset radio stations. To
save energy, the display switches off and you will
not be able to operate the CD/ Tuner functions.
Backup battery (not included)
● Insert 1 x 9V batter y (preferably alkaline) with
the correct polarity
Helpful hints:
– Replace the batteries once a year, or as often
as necessary.
Batteries contain chemical substances, so
they should be disposed of properly
AC power
● Connect the AC power cord to the wall socket.
This switches on the power supply
The type plate is located on the bottom
panel.
a
Template
b
p001-p018_AJ6110_37-Eng 2008.10.16, 10:53 8