Philips AJ6110 - Manual (Page 11)

11
English
Basic functions
Switching on/ to standby and
selecting functions
1
Press POWER to switch on
➜ The set switches to the last source selected
➜ The display lights up
2
To select your function, press CD/AM/FM once
or more (or CD or RADIO on the remote
control)
3
Press POWER to switch the set to standby
➜ The display dims out
Helpful hints:
– In the standby mode, the tone, sound settings,
tuner presets, and the volume level will be
retained in the set’s memory.
Adjusting volume and sound
Adjusting Volume
● Press VOLUME -/+ to adjust the volume
➜ VOL and the actual value (between 00 and
31) are displayed
DBB
●
On the set, press DBB (Dynamic Bass Boost)
once or more to switch bass enhancement on
or off.
➜ DBB appears if DBB is activated
MUTE
During playback, you can temporarily switch off
the sound without switching off the set
1
Press MUTE to switch off the sound
➜ MUTE appears. Playback continues without
sound
2
To switch on the sound, press MUTE again or
adjust the volume with VOLUME controls
➜ MUTE disappears
Display information
1
During playback, press DISP to switch between
the clock/timer display and the status of the set
2
In the standby mode, press DISP to lights up
the clock display
➜
15 seconds later, the display dims out
automatically
p001-p018_AJ6110_37-Eng 2008.10.16, 10:53 11