09 other settings, The input assign menu, Other settings – Pioneer VSX1017TXV User Manual

Page 52: Other settings 09, Chapter 9

Other Settings

Chapter 9:

Other Settings

The Input Assign menu

You only need to make settings in the Input Assign menu
if you didn’t hook up your digital equipment according to
the default settings for the digital inputs, or if you have
connected equipment using component video cables.

Press

RECEIVER

on the remote control, then press

the

SETUP

button.

An on-screen display (OSD) appears on your TV. Use

/ /

and

ENTER

to navigate through the screens

and select menu items. Press

RETURN

to confirm and

exit the current menu.

Select ‘Input Assign’ from the System Setup menu.

Assigning the digital inputs

• Default settings:

Coaxial - 1

–

DVD/LD

Coaxial - 2

–

DVR 2

Optical - 1

–

DVR 1

Optical - 2

–

TV/SAT

Optical - 3

–

You only need to do this if you didn’t hook up your digital
equipment according to the default settings for the
digital inputs (see above). This setting tells the receiver
what digital equipment is hooked up to which terminal so
the buttons on the remote correspond to what you have
hooked up.

Select ‘Digital Input’ from the Input Assign menu.

Select the number of the digital input to which

you’ve connected the digital component.

The numbers correspond with the numbers beside the
inputs on the back of the receiver.

Select the component that corresponds with the

one you connected to that input.

Select between

DVD/LD

TV/SAT

CD-R

DVR 1

DVR 2

SIRIUS

OFF

• Use

and

ENTER

to do this.

• If you assign a digital input to a certain function (for

example,

DVD/LD

) then any digital inputs previously

assigned to that function will automatically be
switched off.

When you're finished, press RETURN.

You return to the Input Assign menu.

Assigning the component video inputs

• Default settings:

Component - 1

–

OFF

Component - 2

–

OFF

Component - 3

–

OFF

If you used component video cords to connect your video
equipment you must tell the receiver which device it is, or
else you may see the S-video or composite video input
instead of the component video signal. For more on this,
see

Using the component video jacks

on page 14.

Select ‘Component Input’ from the Input Assign

menu.

Select the number of the component video input to

which you’ve connected your video component.

The numbers correspond with the numbers beside the
inputs on the back of the receiver.

Select the component that corresponds with the

one you connected to that input.

Select between

DVD/LD

TV/SAT

DVR 1

DVR 2

OFF

• Use

and

ENTER

to do this.

• Make sure you have connected the audio from the

component to the corresponding inputs on the rear
of the receiver.

• If you connect any source component to the receiver

using a component video input, you should also have
your TV connected to this receiver’s component video

MONITOR

output (downconverting component video

is not possible after assigning an input).

When you're finished, press RETURN.

You return to the Input Assign menu.

System Setup

1.Surr Back System
2.Auto MCACC
3.Manual MCACC
4.Manual SP Setup

5.Input Assign

6.Other Setup

: Exit

5.Input Assign

:Return

a.Digital Input

b.Component Input
c.HDMI Input

5.Input Assign

:Return

a.Digital Input

b.Component Input
c.HDMI Input

5a.Digital Input Setup

:Finish

Coaxial - 1

DVD/LD

Coaxial - 2

[ DVR 2 ]

Optical - 1

[ DVR 1 ]

Optical - 2

[ TV/SAT ]

Optical - 3

[

]

5. Input Assign

:Return

a.Digital Input

b.Component Input

c.HDMI Input

5b.Component Input

:Finish

Component - 1

OFF

Component - 2 [ OFF ]
Component - 3 [ OFF ]

VSX-1017TXV_KU.book 52 ページ２００７年４月１２日　木曜日　午前１１時３２分