Philips SC484 DECTSBC - Manual (Page 12)

Switching the night lights on and off
• Press the
ɨ
button (2) on the Baby Unit to switch on the night lights.
• Press the
ɨ
button again to switch off the night lights.
> The nightlights dim and gradually switches off.
Note: Switch off the night lights when operating the Baby Unit on batteries to
conserve power.
Paging the Parent Unit
If the Parent Unit is misplaced and the volume is switched off, you can use
the Page button on the Baby Unit to locate the Parent Unit.
• Press the page button (1) on the Baby Unit.
> The Parent Unit will automatically reset to medium volume level and
paging alert will sound.
• To stop the paging alert, press the Page button again or any button on
the Parent Unit.
Operating range
• The SBC SC484 baby monitor has an open air operating range of up to
300 metres.Walls, ceilings, large objects and even glass will decrease the
operating range. Depending on your local circumstances, the operating
range can decrease down to approximately 50 metres (maximum).When
approaching the outer range boundary, the Parent Unit may produce a
scratching or interrupting sound.The system check function (lights 4, 15
and beeping sound on the Parent unit) will in principle indicate to you the
reliability of the connection between the Parent unit and Baby unit and
whether you are out of range.
ENGLISH 12
SC484_book.qxd 23-09-2004 17:51 Pagina 12