Polaroid t833 - Manual (Page 15)

EN-14
GETTING STARTED
Preparation
1. Attach the camera’s hand strap as shown in the
illustration.
2. Open the camera’s battery/SD card door.
3. Insert the supplied battery in the correct
orientation as shown.
4. Insert a SD/SDHC memory card (Optional).
„ The camera has 32MB internal memory (28MB
available for image storage), but you can load
an SD/SDHC memory card (We recommend the
use of a Polaroid SD card - purchased separately
- up to 8GB) to expand the camera’s memory
capacity.
„ Be sure to format the memory card with this
camera before its initial usage.
5. Close the battery/SD card door and make sure it is
locked securely.
„ To prevent valuable data from being accidentally erased from an
SD/SDHC memory card, you can slide the write protect tab (on
the side of the SD/SDHC memory card) to “LOCK”.
„ To save, edit, or erase data on an SD/SDHC memory card,
you must unlock the card.
„ To prevent damaging of an SD/SDHC memory card, be sure
to turn off the power when inserting or removing the SD/SDHC
memory card. If inserting or removing the SD/SDHC memory
card with the power on, the camera will automatically turn off.