2 sim card holder – Perle Systems NOVACOM Wireless Modem GNS-30CR User Manual
Page 13
![background image](/manuals/186575/13/background.png)
13
7.2 SIM card holder
The connector is intended for 1.8V or 3V SIM cards in accordance with GSM
11.12 phase 2 to operate the Modem.
The SIM card must be inserted in the card holder to put the Modem into
operation.
1) Make sure that there is no voltage applied to the Modem.
2) Operate the eject mechanism (yellow pin next to the card holder) to open the
card holder by pressing it down with a pen, for example
3) Insert the SIM card holder and push it back into the housing. Note: The
SIM card only be replaced when no voltage applied to the Modem. SIM
card pin assignments:
Signal
Pin No.
Input/Output
Description
Parameter
GND
1
X
Gnd
VPP
2
X
N.C
I/O
3
Input/Output
Input/Output
interface
Input: Ri≥1MΩ
Output: Rо=220Ω
CLK
4
Output
Clk
Ro=220Ω
RST
5
Output
Reset signal
R0=220Ω
VCC
6
X
Power
1.8V: (VCC=1.8V±2%)
3V: (VCC=3V±2%)