Panasonic KX-TG1837AL - Manual (Page 14)

Preparation
14
Symbols used in these
operating instructions
Display language
1
{j
/OK}
2 Press {^} or {V} to select “Handset
Setup”. i {>}
3 Press {^} or {V} to select “Display
Setup”. i {>}
4 Press {^} or {V} to select “Select
Language”. i {>}
5 Press {^} or {V} to select the desired
language. i {>} i {ih}
Note:
L
If you select a language you cannot read,
press {ih}, press {j/OK}, press {^} 3
times, press {>}, press {V} 2 times, press
{>}
, press {V}, press {>}, select the
desired language, press {>}, then press
{ih}
.
Date and time
1
{j /OK}
2 Press {^} or {V} to select “Handset
Setup”. i {>}
3 Press {^} or {V} to select “Time
Settings”. i {>} i Press {^} or
{V}
to select “Set Date & Time”. i
{>}
4 Enter the current day, month, and year.
Example: 17 May, 2006
{
1}{7} {0}{5} {0}{6}
5 Enter the current hour and minute.
Example: 3:30 PM
{
0}{3} {3}{0} i Press {*} until
“03:30 PM” is displayed.
6
{j
/OK} i {ih}
Note:
L
To correct a digit, press {<} or {>} to
move the cursor, then make the
correction.
L
The date and time may be incorrect after a
power failure. In this case, set the date
and time again.
Symbol Meaning
{j
/OK} Press {j/OK}.
i Proceed to the next operation.
“ ” Select the words in quotations
shown on the display (e.g.,
“Handset Setup”) by
pressing {^} or {V}.
TG1831-1837AL(e).book Page 14 Friday, February 3, 2006 2:24 PM