Polaroid Daylab 35 - Manual (Page 12)

A curtain-shaped mark or broad streak
If you start to pull the processing tab and
Warranty
Your Daylab 35 is guaranteed against
defects in materials and workmanship for
one full year from the date of original
purchase. During this period, any such
defects will be remedied without charge,
except for transportation costs. The
warranty excludes damage resulting from
normal wear, mishandling or accident,
and a charge will be made for such
repairs. The warranty excludes the
viewing bulb. This warranty excludes
consequential damage. Some
jurisdictions do not allow the
limitation or exclusion of
consequential damages, so the
foregoing may not apply to you.
then stop or hesitate briefly, a
curtain-shaped mark along the print edge
appears. If you stop mid-way into the pull,
a broad streak results. Always pull the
processing tab out in one smooth,
continuous motion.
An oblong in the print(20)
This indicates that you did not pull the
leader tab all the way out. When you then
pulled the processing tab, the leader tab
retracted into the film holder, thus
spoiling the picture. Always pull the
leader tab all the way out of the film
holder.
Underdeveloped edges or corners (21)
These are usually caused by pulling the
processing tab out at an angle. This
prevents the developer from being
spread evenly over the image area. With
color film, pulling the tab at an angle
generally results in orange-red marks
along the edge of the print.
For information or assistance
For further information or warranty
assistance with the Daylab 35 or for
information or assistance with Polaroid
photographic processes, call Polaroid
Corporation, toll-free at 1-800-343-5000,
Mon.-Fri., 8 AM to 8 PM (Eastern Time).
Many small white specks (22)
These indicate that you pulled the
processing tab too swiftly. Pulling the tab
too fast can also cause pink lines, streaks
or blotches on color prints. Pull the
processing tab a little less rapidly, in one
smooth uninterrupted motion.
For service: Before returning the Daylab
35 for service, contact Polaroid
Corporation at 1-800~343-5000 for shipping
instructions and service information.
Polaroid Corporation provides referral
and shipping assistance with the
Daylab 35 with the consent of Pfaff
Manufacturing Inc. and solely as a
service for Polaroid customers. This
service shall not be construed to
warrant or represent the function,
fitness, workmanship or design of any
non-Polaroid products.
A muddy looking print
The print was not allowed to develop
long enough before separation from the
negative. Develop pictures for the fulI
time recommended in the film
instructions. Underdeveloped color prints
tend to be a brownish pink.
10