Peerless Industries KX-TDA15 - Manual (Page 299)

2.3 System Data Control
Feature Guide 299
• Remote Programming Limitation
It is possible to disable remote access through system programming (
Remote
Programming [810]).
• If an extension user sets the Walking Extension feature while the extension data (e.g.,
Headset mode) is programmed through PC programming, some extension data for the
user may not be transferred properly.
Installation Manual References
Installation Manual
2.3.1 MPR Card
2.3.3 RMT Card
2.6.6 CTI-LINK Card
3.1 Overview — KX-TDA100/KX-TDA200
3.2 Connection — KX-TDA100/KX-TDA200
3.3 Installation of the KX-TDA Maintenance Console — KX-TDA100/KX-TDA200
6.5.7 RMT Card
7.1 Overview — KX-TDA30
7.2 Connection — KX-TDA30
7.3 Installation of the KX-TDA30 Maintenance Console
Feature Guide References
1.1.1.2 Direct In Line (DIL)
1.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
1.1.1.4 Multiple Subscriber Number (MSN) Ringing Service
3.2 PC Programming
Programmer
Code
Password Description
Installer Level
Programmer
Code System Password
for Installer All system programming is accessible.
Administrator
Level
Programmer
Code System Password
for Administrator—
for PC Programming Permitted system programming is
accessible. Each system programming can
be determined whether to be accessed by
the administrator.
User Level
Programmer
Code System Password
for User—for PC
Programming Permitted system programming is
accessible. Each system programming can
be determined whether to be accessed by
the end users.