Panasonic KX-TG5871AL - Manual (Page 56)

Programmable Settings
56
Handset LCD contrast
(Monochrome display models
only)
Important:
L
Only the KX-TG5871AL and KX-
TGA580AL support this feature.
You can adjust the handset display
contrast. There are 6 levels.
1
Press {MENU} (centre of joystick).
2
Scroll to N, then press {SELECT}.
3
Scroll to “LCD contrast”, then press
{
SELECT}.
4
Push the joystick up or down repeatedly
to select the desired setting.
5
Press {SAVE}, then press {OFF}.
Handset key tone
You can select whether or not key tones
are heard when keys are pressed.
Includes confirmation tones and error
tones.
1
Press {MENU} (centre of joystick).
2
Scroll to N, then press {SELECT}.
3
Scroll to “Key tone”, then press
{
SELECT}.
4
Push the joystick up or down repeatedly
to select “On” or “Off”.
5
Press {SAVE}, then press {OFF}.
Auto talk
When this feature is turned on, you can
answer a call by lifting the handset off the
base unit or charger without pressing
{C}
.
1
Press {MENU} (centre of joystick).
2
Scroll to N, then press {SELECT}.
3
Scroll to “Auto talk”, then press
{
SELECT}.
4
Push the joystick up or down repeatedly
to select “On” or “Off”.
5
Press {SAVE}, then press {OFF}.
Note:
L
If you subscribe to Caller ID service and
want to view the caller’s information on
the handset display after lifting up the
handset to answer a call, turn off this
feature.
Handset interrupt tone
This tone lets you know when you receive
a call while you are on an intercom call or
monitoring a room.
“2”: The tone will sound 2 times.
“On”: The tone will sound for as long as the
line rings.
“Off”: Turns this feature off.
1
Press {MENU} (centre of joystick).
2
Scroll to N, then press {SELECT}.
3
Scroll to “Interrupt tone”, then
press {SELECT}.
4
Push the joystick up or down repeatedly
to select the desired setting.
5
Press {SAVE}, then press {OFF}.
Recall time
The recall time depends on your telephone
exchange or host PBX.
You can select: “90ms” (milliseconds),
“100ms”, “110ms”, “250ms”, “300ms”,
“400ms”, “600ms”, or “700ms”.
1
Press {MENU} (centre of joystick).
2
Scroll to N, then press {SELECT}.
3
Scroll to “Set tel line”, then press
{
SELECT}.
TG5871AL.book Page 56 Friday, June 17, 2005 7:01 PM