Polycom KH 150 SE - Manual (Page 16)

LinkPlus Interface Guide: Inter-Tel Axxess and Axxent
PN: 1725-36135-001_D.doc 16
Program Axxess or Axxent
Program the Inter-Tel system for use with the Wireless Telephone
System using the Axxess PAL software package that is loaded on
your programming PC.
Copy settings from a wired set
If possible, copy the settings from an existing wired telephone with
similar features and keys to create a “template” handset. Once this is
done, you can program additional options on one handset, then copy
the programming to other handsets or groups of handsets.
Station features for handset
Program the features and keys on the handset in the Individual
Station Programming area on your programming PC. Program the
following as required for the parameters required on the handsets:
Account Codes, Mailboxes, Miscellaneous Flags, Miscellaneous Port
Information, Miscellaneous Station Information, Programmable Keys,
Special Purpose Station, System Forwarding, Toll Restrictions, and
Voicemail Information.
• Keyset Map : Select the standard key set map.
• Ring Intercom : This feature must be enabled. The default is no;
change to yes.
• Shared Speakerphone : Disable this feature if it is not supported on
the handset.
Copy programming
After the handset or handsets have been programmed, use the copy
function to copy the programming to all “like” handsets. The installer
can now test the handsets.