Phoenix Gold RSd5cs - Manual (Page 8)

Phoenix Gold International, Inc.
9300 North Decatur St.
Portland, OR 97203
503.286.9300
www.phoenixgold.com RSd Component System Owner’s Manual 9.05 #8100.0323A
RSd SPEAKERS
COMPONENT SYSTEM OWNER’S MANUAL
T/S Parameters RSd5CS RSd6CS RSd6.5CS
Re (Dcr) 3.6 3.6 3.6
Fo (Hz) 95.0 66.0 63.0
Sd (SqM) 0.0083 0.0117 0.0135
BL (TM) 4.094 4.716 4.907
SPLo (dB) 85.5 88.0 88.2
Qms 7.43 3.89 8.31
Qes 1.14 0.75 0.74
Qts 0.99 0.63 0.68
Vas (cu M) 0.003065 0.01072 0.013182
Cms (uM/N) 310.87 519.02 511.03
Mms (gms) 9.04 11.18 12.66
Mmd (gms) 8.60 10.45 11.76
Power Handling (Minimum RMS/Peak) 5W/120W 5W/120W 5W/120W
VC (in) 1.0 1.0 1.0
Frequency Response (Hz) 65-20K 50-20K 45-20K
Impedance (ohm) 4 4 4
Cut Out Dimension (mm) 115 128 143
Mounting Depth (mm) 61 65 73
PERFORMANCE DESIGN
Developed and CAE/CAD optimized by Phoenix Gold from the ground up to
set new standards in performance.
INJECTION MOLDED ALUMINUM PLATED GRAINED POLYPROPYLENE
CONE
Injection molded to be very light and rigid for excellent signal tracking.
BUTYL RUBBER SURROUND
Advanced butyl rubber surround is more rugged than foam, resists moisture
and UV, and is extremely well damped.
FLAT LINEAR ROLL SPIDER ( e ec de )
Reduces distortion and provides maximum voice coil centering.
INTERWOVEN TINSEL LEADS
Tinsel leads woven directly into the spider provide added strength and
reliability.
RIGID POWDER COATED STEEL FRAME
OPTIMIZED MAGNET/MOTOR STRUCTURE
Results in high efficiency and clarity of sound reproduction.
FEATURES:
SPECIFICATIONS:
Due to continual product improvement, all specifications subject to change without notice.