Phoenix Gold RSd5cs - Manual (Page 4)

RSd SPEAKERS
COMPONENT SYSTEM OWNER’S MANUAL
Phoenix Gold International, Inc. • 9300 North Decatur St. Portland, OR 97203 • 503.286.9300 • www.phoenixgold.com
CROSSOVER HOOKUP
The crossover provided with the RSd component set is optimized to give
the most accurate in-car response. Use only the crossover provided;
the use of any other crossover may result in damage to one or more of
the RSd series components.
The basic component system hookup requires signal, via speaker wire,
to run from your power amplifier (not included in this set) to each of the
two crossovers that come with your RSd component system, designate
one for the left channel and one for the right. Connect that signal to
the signal input on the crossover. From there connect your component
woofer and tweeters to the corresponding crossover using the correct
polarity.
����� ������ �������
AMPLIFIER (NOT INCLUDED IN THIS SET)
CROSSOVER
TWEETER
MID RANGE WOOFER
MID RANGE WOOFER
TWEETER