PYLE Audio PLCD20CH - Manual (Page 11)

11
INSTALLATION
Procedure for Installation (Suspended Position)
1
2 3
• Confirm that the built-in
anti-vibration boards on both the left
and right sides are set to the
horizontal installation position “0”.
• Attach the left and right brackets (A)
using the hexagonal bolt (M4 x 5).
• Determine the mounting location
and drill four mounting holes.
• Attach the CD changer with the
tapping screws (M5 x 12).
3.6ø
Hexagonal Bolts
Built-in anti-vibration
board position
Hexagonal Bolts