Panasonic DMC-GH2 - Manual (Page 118)

VQT3A36
118
Recording
Note
• Noise may become visible when you take pictures in dark places. To avoid picture noise, we
recommend setting [NOISE REDUCTION] towards [
_] or setting the items except [NOISE
REDUCTION] towards [ `] to take pictures.
• If you adjust a Film Mode, [ _] is displayed beside the Film Mode icon on the screen.
• [SATURATION] is disabled in the Black and White Film Mode setting.
• The Film Mode is disabled in Intelligent Auto Mode, Scene Mode and Advanced Scene Mode.
∫ Multi Film Bracket
It will take pictures changing the type of film in accordance with the setting every time the
shutter button is pressed. (Up to 3 pictures)
1
Touch [ 2]/[1] to select [MULTI FILM].
2
Select [MULTI FILM 1], [MULTI FILM 2], or
[MULTI FILM 3], and then touch [
2]/[1] to select
the film to be set for each.
•
[OFF] can be selected only for [MULTI FILM 3].
3 Touch [SET].
•
Multi film indication ([ ]) displayed on the screen will
flash until all pictures of preset amount are taken.
Note
• Motion pictures are recorded with the settings for the [MULTI FILM 1] setting.
Item Effect
[CONTRAST]
[ r]
Increases the difference between the brightness and the
darkness in the picture.
[ s]
Decreases the difference between the brightness and the
darkness in the picture.
[SHARPNESS]
[ r] The picture is sharply defined.
[ s] The picture is softly focused.
[SATURATION]
[ r] The colors in the picture become vivid.
[ s] The colors in the picture become natural.
[NOISE
REDUCTION]
[ r]
The noise reduction effect is enhanced. Picture resolution may
deteriorate slightly.
[ s]
The noise reduction effect is reduced. You can obtain pictures
with higher resolution.
S
DMC-GH2H&GH2K&GH2PP-VQT3A36_eng.book 118 ページ ２０１０年１０月１９日 火曜日 午前１１時３分