PYLE Audio SOUNDPOINT IP SIP 3.2.1 - Manual (Page 60)

User Guide for the SoundPoint IP 32x/33x Desktop Phone
3 - 14
Enabling Do Not Disturb
Press and then select Features > Do not disturb to prevent the
phone from ringing on incoming calls. A flashing icon and text on the graphic
display indicates that Do Not Disturb is on.
Calls received while Do Not Disturb is enabled are logged in the Missed Calls
list unless configured to be forwarded to another party by your system
administrator.
To disable Do Not Disturb, press and then select Features > Do
not disturb again.
Multiple Lines and Do Not Disturb
If multiple lines are configured on your phone, Do Not Disturb can be set on a
line-by-line basis from the list using
and . For more information,
contact your system administrator. When Do Not Disturb is enabled for a
particular line, this is indicated by a flashing “X” beside the line indicator on
the display.
Assigning Speed Dial Indexes
You can associate a contact with for single touch dialing of a
frequently used number.
For example in the figure below, pressing
places a call to James.
Note This feature is local to the phone, and may be overridden by call server settings.
For more information, contact your system administrator.
Note The contact with the lowest speed dial index will be associated with the Line 2 key
for single touch dialing.