Pioneer AVH-P7550DVD - Manual (Page 15)

14
English
Español
Português (B)
Français
Italiano
Nederlands
DIN Front-mount
Installation with the rubber bush
1. Decide the position of the side
brackets. (Fig. 13)
When installing in a shallow space,
change the position of side brackets. In
this case, stick conceal tape on parts
that protrude from the dashboard.
Fig. 13
2. Install the unit into the dash-
board. (Fig. 14)
After inserting the holder into the
dashboard, then select the appropriate
tabs according to the thickness of the
dashboard material and bend them.
(Install as firmly as possible using the
top and bottom tabs. To secure, bend
the tabs 90 degrees.)
• After installing the unit into the
dashboard, reattach the frame.
Fig. 14
Rubber bush
Screw
Dashboard
Side bracket
Screw (2 × 3 mm)
182
53
Holder
Conceal tape
Side bracket
Flush surface screw (5 × 6 mm)