Installing the hide-away unit din front/rear-mount, Installation, Installing the hide-away unit – Pioneer AVH-P7550DVD User Manual

Page 14: Din front/rear-mount, Mounting with brackets, Mounting with velcro tape, Before installing the unit

Installation

Installing the hide-away unit

Mounting with Brackets

Fig. 10

Mounting with Velcro Tape

Thoroughly wipe off the surface
before affixing the velcro tape.

Fig. 11

DIN Front/Rear-mount

This unit can be properly installed
either from “Front” (conventional DIN
Front-mount) or “Rear” (DIN Rear-
mount installation, utilizing threaded
screw holes at the sides of unit chas-
sis). For details, refer to the following
illustrated installation methods.

Before installing the unit

• Remove the frame and the hold-

er. (Fig. 12)

Pull out to remove the frame and then
loosen the screws (2

× 3 mm) to

remove the holder. (When reattaching
the frame, point the side with a groove
downwards and attach it.)

Fig. 12

Holder

Frame

Screw (2

× 3 mm)

Car mat or chassis

Velcro tape
(large)

Screw
(4

× 8 mm)

Car mat or chassis

Bracket

Tapping screw (4

× 12 mm)

Drill 2 to 2.5 mm diameter holes.