Pioneer VSX-D509S - Manual (Page 24)

24
1 Press REMOTE SET UP and 1 at the same time
to select the preset mode.
The LED on the remote control starts to blink.
To cancel the preset mode at any time
Press REMOTE SET UP.
2 Press the MULTI CONTROL button for the
component you want to control.
Each button can be set to control one of the following components
DVD/LD : DVD or LD player
TV/SAT : TV or Satellite tuner
VCR/DVR : VCR or Digital Video Recorder
CD : CD player
CD-R/TAPE/MD : CD Recorder or Tape deck or MD player
TV CONT : TV or Cable TV tuner
The LED lights steadily and the first manufacturer (and
preset code(s)) appear in the display.
If no commands are entered the receiver automatically exits
the preset code mode after 20 seconds.
3 Press
% or fi repeatedly to display the name of
the component’s manufacturer.
If necessary, press @ or # to see if an alternative code from
the same manufacturer is available.
A list of all available preset codes is provided on page 57.
If no commands are entered the receiver automatically exits
the preset code mode after 20 seconds.
Preparations
Recalling preset codes (VSX-D409)
The following steps show you how to recall preset codes for each MULTI CONTROL button. Once the preset
code is assigned, pressing the button will automatically set the remote to operate the respective component.
• Refer to “Preset Code List” on page 57 for the components and manufacturers available.
• Refer to “Controlling the Rest of Your System” on pages 46 to 50 for detailed explanations
on how to operate your other components.
1,5
2
1
4
MULTI CONTROL
DVD/LD TV/SAT VCR/DVR CD
LOUDNESS FUNCTION MUTING
RECEIVER
D.ACCESS CHANNEL
ATT
VOL
MENU
TOP
MENU
VOL
CH
2 DSP MODE MIDNIGHT 5.1CH
CD-R/
TAPE/MD
CHANNEL
SELECT
CHANNEL
LEVEL EFFECT
ENTER
ENTER
FQ
FQ
ST ST
FL
DIMMER
REMOTE
SETUP
MASTER
VOLUME
AUDIO/VIDEO PRE-PROGRAMMED
REMOTE CONTROL UNIT
TV CONTROL
FUNC
10 DISC
SIGNAL
SELECT
TEST
TONE
RECEIVER TUNER TV CONT
Î
1 2 3 4
1 ¡ 4 ¢
7 8 3
5 6 7 8
9 0 ‡
SOURCE CLASS MPX BAND
LED
3
dB
dB
dB
dB
dB
dB dB
memo