ParaBody 829 - Manual (Page 10)

FIGURE 16
33
Securely assemble two 3/8” SPRING PIN AS-
SEMBLIES (17) into the spring pin barrels on
the LEG CURL/EXTENSION (6) as shown in
FIGURE 15.
FIGURE 15
FIGURE 14
STEP 17 :
4 5
6
17
28
5
28
4
28
17
Insert 5” & 13-1/2” ROLLER PAD
ADJUSTERS (4 & 5) in the ends of the
LEG CURL/EXTENSION (6). Pull back
on SPRING PINS until ROLLER PAD
ADJUSTERS (4 & 5) lock in place. See
FIGURE 16. STEP 18 :
Attach eight 1-1/2” X 3/4” GLIDES (33) to 5”
ROLLER PAD ADJUSTER (4) and attach eight
1-1/2” X 3/4” GLIDES (33) to 13-1/2” ROLLER
PAD ADJUSTER (5) as shown in FIGURE 14. STEP 16 :
6
Insert three 2” SQUARE END CAPS (28)
into the ends of the LEG CURL/EXTEN-
SION (6). See FIGURE 16. STEP 19 :
10