Philips 150P3A - Manual (Page 7)

• Vertical refresh rate 56Hz-76Hz
• Horizontal frequency 30KHz-61KHz
VIDEO
• Video dot rate 80 MHz
• Input impedance
- Video 75 ohm
- Sync 5K6 ohm
• Input signal levels 700m Vpp
• Sync input signal
Separate sync
Composite sync
Sync on Green
• Sync polarities Positive and negative
• Input Frequency
XGA Hsync 48- 61 KHz, Vsync 60 - 76 Hz (N.I.)
SVGA Hsync 35- 50 KHz, Vsync 56 - 75 Hz (N.I.)
VGA Hsync 31- 38 KHz, Vsync 60 - 76 Hz (N.I.)
• Video interface
Dual input: Both Analog (D-Sub) and DVI-D (Digital only) are
available. It can be switching via OSD selection.
AUDIO
• Input signal level 0.7 Vpp
• Headphone out signal level 32 Ohm 20+20mW
• Input signal connector 3.5mm mini jack
• Loudspeaker 2+2W stereo front firing (PMPO: 48W)
MICROPHONE
• Sensitivity -55dB re 1V/ubar at 1KHz
• Output impedance 2.2K Ohm max.
• Directivity -5dB at 180°
• Frequency range 300Hz-3KHz
OPTICAL CHARACTERISTICS
• Contrast ratio 350 (typ.)
• Brightness 250 cd/m 2 (typ.)
• Peak contrast angle 6 o'clock
Product Information
file:///D|/Grace/03771/english/150p3ac/product/product.htm (2 of 9) [1/30/2002 2:37:11 PM]