Pioneer Industrial DVD Player DVD-V7400 - Manual (Page 29)

Command Descriptions
Integer Speed Parameter Speed
60 46~90 1/1
30 23~45 ½
15 12~22 ¼
7 6~11 1/8
4 3~5 1/16
1 0~2 Step1
NOTE: VCD only offers 1/2 to 1/16 forward speeds. Reverse speed is not
available for VCD.. Speeds are approximate values only.
Execution :
String Status Return DVD player
4SPMF R Play mode to 1 /
16
speed forward
30SP R Multi-Speed to ½ Multi-Speed
4SPMR R 1 /
16
speed reverse
5.16 Search
Function : Search to specified address
Format : Address SE
Explanation : The specified address is written into the Search Register in
accordance with the current Search address mode.
When the Search command is sent to the player, the specified address is
compared with the current address. The pick-up is moved so that the
difference becomes 0.
Upon reaching the specified address, the player enters the Pause mode for a
CD or the Still mode for others disc types. The player then returns the
completed status message. If the player misses the specified address or can
not find it, an error message (E06 or E12) is returned. However, if the disc
program disallows a Time or Chapter Search, the player ignores the
command and an error message (E04) is returned. In addition, if the disc
program blocks the Pause command, the player ignores the command.
The DVD-V7400 does not accept other commands during the execution of a
Search command, returning an E04 error message. After issuing a Search
command, wait until the Return (R) status appears before issuing another
command. An exception to this rule is the Mark Frame Play command (i.e.
FR1200PL), when it is unnecessary to wait for the R status before sending
additional commands.
- 22