Precor Assembly Guide Ab-X100 - Manual (Page 8)

Ab-X100 Assembly Guide
page 8
2
Assembly
Instructions
Assembly Instructions
Assembly of the Ab-X100 takes about 45 minutes to
complete. If this is the first time you have assembled
this type of equipment, plan on allowing more time.
Be careful to open boxes and assemble components in
the sequence presented in this manual.
Note: With so many assembled parts, proper alignment
and adjustment is critical. While tightening the fasteners,
be sure to leave room for adjustments.
Do not fully
tighten fasteners until instructed to do so.
Open the Box
Use wire tie cutters to open the box and remove
packing materials.
The illustration shows how the Ab-X100 will look when
you have completed its assembly. The callouts identify
specific pieces.
Base Support
Main Frame
Pivot
Arm
Handlebars
Seat Pad
Support Bar
Back
Pad
Footrest