PYLE Audio PLR7N - Manual (Page 17)

15
1. Connect a NAVIGATION system to AV1 or AV2 Input terminals on the rear of the unit.
2. Press the MODE button to select radio mode.
3. Press the MENU button to select following picture.
NAVIGATION
Do not select the AV mode connected to the NAVIGATION system with
the MODE button. If AV Input connected to the NAVIGATION system is
selected with the MODE button, the monitor does not show the
NAVIGATION picture. The monitor shows the WARNING picture. NOTE
SETTING THE NAVIGATION
WATCHING THE NAVIGATION PICTURE
4. Press the SEARCH UP/DOWN button to select NAVIGATION.
5. Press the VOLUME
button to select AV1 or AV2 that NAVIGATION system
is connected to.
Each time you press this button, AV Input changes as follows
AV 1 -> AV2 -> OFF
Press the NAVI button on radio, AV1, 2 or 3 mode. The monitor shows the navigation
picture.
RADIO SUB MENU