Using the features – Polaroid FLM-1911 User Manual

Page 21

USING THE FEATURES

Turning the TV On and Off

After connecting a CATV or antenna to your LCD TV, and turn the POWER SWITCH of rear TV

on, an amber LED light indicates when the LCD TV is activated.

Press the

POWER

button, the LED green light indicates on.

Press the

POWER

button, the LED amber light indicates off .

Select Source

Press the

INPUT

button to display the selection signal on the screen.

Select TV Channel

Press the

CH+/-

button on the remote control and the

CHANNEL

▲/▼ button on the LCD

TV to select channel.

Press the

0~9

buttons then press the

ENTER

button to input the channel No. and enter into

the selection channel No.

Press the

JUMP

button on the remote control to swap the channel between the current

channel No. and the previous channel No.

Adjusting the Volume

Press the

VOL +/–

button on the remote control or the

VOLUME +/-

button on the LCD TV to

adjust the volume.

To Mute the Sound

1 Press

MUTE

and the sound cuts off .

2 To turn mute off , press the

MUTE

button again, or simply press the

VOL +/-

buttons.

Sleep Timer

Press the

SLEEP

button continuously to select the sleep timer or turn the sleep timer from the

OFF,15,30,45,60,90 and 120 minutes; when the LCD TV has been reached the set time, it will
automatically turn off . If the TV has no input signal, the screen will appeared blue screen and
display NO Signal; The TV will automatically change stand by after 15 minutes.

USING THE FEATURES

Basic Operation