Pioneer BDP-95FD - Manual (Page 39)

07
39
En
Chapter 7
Video/Audio Adjust menu
From the Video/Audio Adjust menu you can make various settings
that affect how video is presented on your TV and how the sounds.
Items in the
Video/Audio Adjust menu can only be changed
during playback.
Video Adjust
• Default setting: Standard
From the Video Adjust screen you can select the Standard or
Cinema video presentation or define presets of your own in
Memory 1 to Memory 3.
1 Press HOME MENU and select ‘Video/Audio Adjust’ from
the on-screen display.
You can press
VIDEO ADJUST on the remote to display the Video
Adjust screen.
2 Select ‘Video Adjust’.
3 Use the / buttons to select a preset.
• Standard – Standard setting
• Cinema 1
– Optimized for watching movies
• Memory 1/Memory 2/Memory 3 – Use for saving your own
presets (see Creating your own presets below)
4 Press ENTER or RETURN to make the setting and exit the
Video Adjust screen.
PureCinema
There are two types of video signals: Video interlace material, with a
frame rate of 30 frames/second; and film progressive material, that has
a frame rate of 24 frames/second.
In PureCinema mode film progressive material is converted to 60
frames/second progressive, which matches more closely the picture
quality of a cinema screen. (24 frames/second source is converted to 60
frames/second.)
When you have
Video Adjust set to Standard, Cinema, or Memory 1,
Memory 2 or Memory 3 and play a BD-ROM or DVD disc video that can
be identified as film progressive or video interlace material, PureCinema
mode is automatically activated.
If you notice problems with the images projected when set to
Cinema
(images appear to motion-blurred, or jagged), set the Video Adjust to
Standard or Memory 1, Memory 2 or Memory 3.
Creating your own presets
You can create up to three presets of your own.
1 Select one of the Memory presets.
2 Press  to select ‘Detailed Settings’ then press ENTER.
3 Adjust the picture quality settings.
• Use the / buttons to select a setting.
• Use the / buttons to adjust the current setting.
Select a setting then press ENTER to display just that setting. This
gives you more screen area in which to see the effects of changes
you make.
• Press ENTER or RETURN to go back to full-screen display.
You can adjust any or all of the following picture quality settings:
• White Level 1 – Adjusts the intensity of white.
• Black Level 1 – Adjusts the intensity of black.
• Hue 1 – Adjusts the overall color balance between red and green.
• Chroma Level 1 – Adjusts how saturated colors appear.
4 Press RETURN to save the preset and exit the Detailed
Settings screen.
Note
1 Effective only for video output from HDMI OUT or COMPONENT VIDEO OUT connections (settings do no affect video output from VIDEO OUT or S-VIDEO OUT).
Home Menu
Disc Navigator
Home Media Gallery
Video/Audio Adjust
Initial Setup
Standard
Detailed Settings
Memory 1
Detailed Settings
Memory 1
Hue
M i n Max White Level
Max Black Level
Max Chroma Level
G r e e n Red
M i n
M i n
Memory 1
Min Max White Level