Pride Mobility Dynamic Controller INFMANU3676 - Manual (Page 7)

Basic Operation Instructions 7
www.pridemobility.com Dynamic Controller
DYNAMIC CONTROLLER
The Dynamic controller is a modular electronic controller system that
allows you to operate your power chair. It is designed to allow the user to
have complete control over chair movement and speed.
The controller is available in both 50-amp and 60-amp configurations, and
has been pre-programmed to meet a typical user’s needs. The program is set
using either a personal computer with software provided by the controller
manufacturer or with a hand-held programmer, also provided by the control-
ler manufacturer.
WARNING! The controller program can affect speed,
acceleration, deceleration, dynamic stability, and braking.
If it is programmed incorrectly or outside of the safe limits
as determined by your healthcare professional, it can
create a dangerous situation. Only the power chair
manufacturer, an authorized representative of the
manufacturer, or a trained service technician should
program the controller.
PRECAUTIONARY GUIDELINES
Before operating the Dynamic controller, please read the following. These
guidelines are provided for your benefit and will aid you in the safe opera-
tion of the controller system.
„ Turn off the power to the controller when transferring to or from your
power chair.
„ Follow all of the procedures and heed the warnings as explained in your
power chair owner’s manual.