Pride Mobility Dynamic Controller INFMANU3676 - Manual (Page 15)

Basic Operation Instructions 15
www.pridemobility.com Dynamic Controller
NOTE: We recommend that the first few times you operate your power
chair, you set the speed to the slowest setting until you become familiar
with your new power chair.
Speed Setting Indicator
The speed setting indicator indicates the current speed of your power chair.
The speed setting indicator consists of 16 lights arranged clockwise around
the horn key. As the speed of the power chair increases, the number of lights
increases. There are five larger LEDs which represent 0%, 20%, 40%, 60%,
80%, and 100% of the power chair’s maximum speed. Press the speed
decrease key or speed increase key once to adjust the speed in the five larger
increments. Press and hold the the speed decrease key or speed increase key
to adjust the speed in individual increments.
NOTE: When the bottom, left-most green LED is flashing, it indicates that
the controller is in speed limit mode.
Service Indicator
The service indicator displays Dynamic controller error codes. Refer to
“Error Codes.”
Attendant Control Indicator (For Optional Equipment)
The attendant control indicator is on when the optional Attendant Control
Unit is activated.
Actuator Select Key with Lights (For Optional Equipment)
If your power chair is equipped with power accessories such as a power seat
or power elevating leg rests, you can operate them through the keypad.
Refer to “Actuator Adjustment.”
Right/Left Turn Indicator Keys (For Optional Equipment)
The right/left turn indicator keys toggle either the left or right turn indica-
tors. Press once to turn on and press again to turn off. You can also turn off
the selected turn indicator by pressing the opposite indicator key or the haz-
ard key.