Pioneer BDR-203 - Manual (Page 7)

BDR-203/BDC-203 Command Reference Manual Version 0.90
Page 6
4 Packet Commands
The following commands are implemented in the drive.
In case of BDC-203, the following commands are not performed for BD-R/RE; CLOSE TRACK/SESSION, FORMAT UNIT,
RESERVE TRACK, SEND DISC STRUCTURE, SEND OPC INFORMATION, SYNCRONIZE CACHE, WRITE(10),
WRITE(12), and WRITE AND VERIFY commands.
Table 1– Packet Commands
Reference
Command Description
Operation
code SFF8090i MMC-5 This document
BLANK Command A1h 17.1 6.2 4.1
CLOSE TRACK/SESSION Command 5Bh 17.2 6.3 4.2
FORMAT UNIT Command 04h 17.3 6.5 4.3
GET CONFIGURATION Command 46h 17.4 6.6 4.4
GET EVENT/STATUS NOTIFICATION Command 4Ah 17.5 6.7 4.5
GET PERFORMANCE Command ACh 17.6 6.8 4.6
INQUIRY Command 12h 17.7 6.9 4.7
LOG SELECT Command 4Ch 4.8
LOG SENSE Command 4Dh 4.9
MECHANISM STATUS Command BDh 17.9 6.11 4.10
MODE SELECT (10) Command 55h 17.10 6.12 4.11
MODE SENSE (10) Command 5Ah 17.11 6.13 4.12
PAUSE/RESUME Command 4Bh 17.12
PLAY AUDIO (10) Command 45h 17.13
PLAY AUDIO (12) Command A5h
PLAY AUDIO MSF Command 47h 17.14
PLAY CD Command BCh 4.13
PREVENT / ALLOW MEDIUM REMOVAL Command 1Eh 17.15 6.14
READ(10) Command 28h 17.16 6.15 4.14
READ(12) Command A8h 17.17 6.16 4.14
READ BUFFER Command 3Ch 17.18 6.17 4.15
READ BUFFER CAPACITY Command 5Ch 17.19 6.18 4.16
READ CAPACITY Command 25h 17.20 6.19 4.17
READ CD Command BEh 17.21 6.20
READ CD MSF Command B9h 17.22 6.21
READ DISC INFORMATION Command 51h 17.23 6.22 4.18
READ DISC STRUCTURE Command ADh 17.24 6.23
READ FORMAT CAPACITIES Command 23h 17.25 6.24
READ HEADER Command 44h
READ SUBCHANNEL Command 42h 17.26
READ TOC/PMA/ATIP Command 43h 17.27 6.26
READ TRACK INFORMATION Command 52h 17.28 6.27
REPAIR RZONE Command 58h 17.29 6.28
REPORT KEY Command A4h 17.30 6.29
REQUEST SENSE Command 03h 17.31 6.30 4.19
RESERVE TRACK Command 53h 17.32 6.31
SCAN Command BAh 17.33
SEEK (10) Command 2Bh 17.34 6.32
SEND CUE SHEET 5Dh 17.35 6.33
SEND DIAGNOSTIC Command 1Dh
SEND DISC STRUCTURE Command BFh 17.36 6.34
SEND KEY Command A3h 17.38 6.35
SEND OPC INFORMATION Command 54h 17.39 6.36
SET CD SPEED Command BBh 17.40 6.37 4.20
SET READ AHEAD Command A7h 17.41 6.38
SET STREAMING Command B6h 17.42 6.39 4.21
START/STOP UNIT Command 1Bh 17.43 6.40
STOP PLAY/SCAN Command 4Eh 17.44
SYNCHRONIZE CACHE Command 35h 17.45 6.41
TEST UNIT READY Command 00h 17.46 6.42
VERIFY(10) Command 2Fh 17.47 6.43
WRITE (10) Command 2Ah 17.48 6.44 4.22
WRITE (12) Command AAh 17.49 6.45 4.22
Pioneer
Confidential