Philips SPC2050NC - Manual (Page 20)

20 Frequently asked questions
Note!
The maximum frame rate (frames per second
(fps) produced by the WebCam) and the
maximum image resolution depend on the
specifications of your PC / laptop.The WebCam
software will automatically adjust frame rate and
resolution as good as possible for your
particular situation. It might be possible that the
specifications of your PC / laptop do not meet
the requirements for maximum frame rate and
resolution setting.
9.4 How can I reset the settings of my
Philips WebCam to the default
factory settings?
Open the Philips CamSuite control panel by
double clicking the Philips CamSuite icon ‘ ’
in the Windows taskbar (bottom right of
your screen).
Click the ‘ ’ button to open the property
pages.
• The General settings screen appears.
Click the Video tab.
Click the ‘Reset’ button.
• All WebCam settings are now reset back to the
default factory settings.
Click ‘OK’ to save your settings. 5
4
3
2
1
9.5 How can I clean the lens of my
Philips WebCam?
Blow the dust from the lens, using an air
brush.
Use a lens cleaning tissue to softly wipe the
lens.Wipe from centre to edge in a
counterclockwise direction.
• If there are still spots on the lens, dip a cotton
bud into a lens cleaning fluid and softly wipe
the lens, as described in step 2.
When the cleaning fluid has evaporated,
clean the lens using a lens cleaning tissue. 3
2
1