Panasonic WV-CW964 - Manual (Page 10)

CONSTRUCTION
Ensuring Trouble-free Operation
• This camera uses a “slip ring” for transmission of electrical power and signals. A dirty slip ring can cause
deterioration of picture quality during panning and generation of noise.
In order to ensure trouble-free camera operation, make sure that the cleaning function (page 38) is turned on.
• If cleaning the slip ring does not eliminate poor picture quality and noise, it could mean that the slip ring has
reached the end of its service life. Contact a qualified service person or system installer to have it replaced.
-10-
Alarm Input Connector
Alarm Output Connector
Video Output Connector
Data Port
Attachment Pipe
Upper Base
Rear sun shield (provided)
Front sun shield (provided)
Sun shield (pre-attached at factory)
Dome cover (do not remove)
Lens The lens cannot replaced.
Camera Safety Wire
Power Cord
for Heater
Power Connector
WV-CW964 05.10.20 10:39 AM ページ10