Operations on the receiver and cable connections, Continue – Pioneer SC-07 User Manual

Page 7

Operations on the Receiver and Cable Connections

Connect the receiver and the computer in order to display on the computer the various data measured on
the receiver itself.

Connect the receiver to your PC with a RS-232C cable.

Before making or changing connections, switch off the power and disconnect the power cord from
the power outlet. Plugging in components should be the last connection you make with your
system.

• When using a notebook computer or other computer without an RS-232C terminal, this application can

be used by connecting the receiver via USB using a commercially available USB-RS-232C conversion
cable (USB-Serial cable). When using USB connections, be sure to select the proper COM port
number for data transmission (see

page 9

• The type of cable to use is a female-female cross cable. Different manufacturers use different names to

refer to this type of cable. Sometimes it is called an “interlink” cable, and sometimes it is called a
“reverse” cable.

Pin-out diagram of RS-232C cable to connect receiver and PC

• The following cable has been proved to ensure system operation.

Caution

Note

Brand

Cable

Part NO.

Belkin

Pro Series Serial Direct Cable-10 feet

F3B207-10

STANDBY/ON

INPUT

SELECTOR

PHASE

CONTROL

ADVANCED

MCACC

DIGITAL VIDEO

SCALER

HDMI

MASTER
VOLUME

RS-232C

SC-07/SC-05

Female-female

cross cable

Dsub 9-pin female

Continue