Peavey 8002 - Manual (Page 11)

p. 9
installation
2
powering
Unless otherwise specified when ordered, Pro II amplifiers shipped to cus-
tomers are configured as follows:
North America 90–255 VAC @ 50–60 Hz
Europe 180–255 VAC @ 50–60 Hz
Asia 180–255 VAC @ 50–60 Hz
Australasia 180–255 VAC @ 50–60 Hz
South America 90–255 VAC @ 50–60 Hz
Japan 90–255 VAC @ 50–60 Hz
maintenance
A Pro II Series amplifier requires no routine maintenance other than the
occasional cleaning or replacement of the fan intake filters on the rear of the
amplifier.
( This operation does not require any tools. ) Filters must be kept
clear and clean to ensure proper ventilation through the unit.
If the amplifier is used in an extremely dusty or smoky environment, the fil-
ter should be cleaned or changed frequently and the unit should be period-
ically “blown free”
( using compressed air ) of any foreign matter that may have
penetrated the filter.
Users will not need to make any internal adjustments to the amplifier dur-
ing its lifetime. There are no user-serviceable parts or adjustments that
require opening the power amplifier.
Always turn off and dis-
connect the amplifier from
mains voltage before mak-
ing audio connections.
As an extra precaution, have
the attenuators turned down
during power-up.
a
Cover removal exposes
the risk of shock, so refer
all servicing to qualified
service technicians autho-
rized by Crest Audio.
a