Panasonic SC-HT07 EN - Manual (Page 7)

7
RQT7
38
4
Speaker setup (for
S
C
-HT0
7 an
d SC
-HT
05)
Ste
p
1
7.5 -9.5 mm
SC-HT07 SC-HT05
150 mm
230 mm
Screw (not included)
Attaching to a wall
Wall or pillar
30 - 35 mm
8 - 11 mm
3
SC-HT07
SC-HT05
CENTER
FRONT (R)
FRONT (L)
SURROUND
(L)
2 1 4 3 5
SURROUND
(R)
4
3
1
5
2
FRONT
(6 Ω)
CENTER
(6 Ω)
SURROUND
(6 Ω)
R L R L
Connect the speaker cables to the subwoofer.
Subwoofer
Copper
Silver Note
Never short-circuit positive (+)
and negative (–) speaker wires.
Copper
Silver
Copper
Silver
Other speaker setup options
• The wall or pillar on which the speakers are to be attached should be capable of
supporting 10 kg per screw. Consult a qualified building contractor when attaching
the speakers to wall. Improper attachment may result in damage to the wall and
speakers.
• (SC-HT07) When mounting the front and surround speakers to walls, use a string
(not included) to prevent them from a falling ( è page 5). Use of optional speaker
cables are recommended for wall mounted front and surround speakers. (You can
also remove the speaker cables from the pipes supplied with this system).
Fitting optional speaker stands
SC-HT05
60 mm
Plate thickness +7 to 10 mm
Speaker
stands (not
included)
• Observe the diameter and length of the
screws and the distance between screws
as shown in the diagram.
• The stands must be able to support over
10 kg.
• The stands must be stable even if the
speakers are in a high position.
5 mm, Pitch 0.8 mm
(4 m x 1) SC-HT07
(4 m x 3) (10 m x 2) SC-HT05
5
xxxxxx xxx
5 xxxxxx xxx
4
xxxxxx xxx
4 xxxxxx xxx
3
xxxxxx xxx
3 xxxxxx xxx
2
xxxxxx xxx
2 xxxxxx xxx
1
xxxxxx xxx
1 xxxxxx xxx
5
xxxxxx xxx
5 xxxxxx xxx
4
xxxxxx xxx
4 xxxxxx xxx
3
xxxxxx xxx
3 xxxxxx xxx
2
xxxxxx xxx
2 xxxxxx xxx
1
xxxxxx xxx
1 xxxxxx xxx
( x 1)
Supplied
accessories Speaker cable(s) Sticker sheet
SC-HT07EB-EN.fm Page 7 Friday, May 7, 2004 4:29 PM