Philips BDP3390 - Manual (Page 16)

17 EN
3 Change settings
This section helps you change the settins of this
player.
Note
‡ You cannot change a menu option that is grayed out.
‡ To return to the previous menu, press . To exit the
menu, press
.
Picture
1
Press .
2
Select [Setup] > [Video] to access the
video setup options.
‡ [TV display]: Select a picture display format
WR ÀW WKH 79 VFUHHQ
‡ [HDMI video]: Select an HDMI video
resolution.
‡ [HDMI Deep Color]: Display colors with
more shades and hues when the video
content is recorded in Deep Color and the
TV supports this feature.
‡ [Picture settings] 6HOHFW D SUHGHÀQHG
color setting.
1
2
3
Watch 3D video
‡ [Watch 3D video]: Set to 3D or 2D
output when playing a Blu-ray 3D disc.
The player must be connected to a 3D TV
through HDMI.
Note
‡ If you change a setting, make sure that the TV supports
the new setting.
‡ For settings related to HDMI, the TV must be
connected through HDMI.
‡ For the composite connection (via the VIDEO
connector), select a video resolution of 480i/576i
or 480p/576p under [HDMI video] to enable video
output.
Sound
1
Press .
2
Select [Setup] > [Audio] to access the
audio setup options.
‡ [Night mode]: Select quiet or full dynamic
sound. Night mode decreases the volume
of loud sound and increases the volume of
soft sound (such as speech).
‡ [Neo 6]: Enable or disable a surround
sound effect which is converted from 2.0
channel audio.
‡ [HDMI Audio]: Set an HDMI audio format
when this player is connected through
HDMI.
‡ [Digital Audio]: Select an audio format
for the sound output when this player is
connected through a digital connector
(coaxial).
‡ [PCM Downsampling]: Set the sampling
rate for PCM audio output when this
player is connected through a digital
connector (coaxial).
Note
‡ For settings related to HDMI, the TV must be
connected through HDMI.
‡ Night mode is only available for Dolby encoded DVD
and Blu-ray discs.