Philips AJ3915/12 - Manual (Page 8)

101 01
200 00
➜ When alarm are/is set and activated.
ALM1 and/or ALM2 are/is displayed.
Selecting alarm mode
1 Press POWER to switch to standby.
2 Select your choice of alarm mode: either CD
radio, or buzzer by using the
CD•RADIO•BUZZER slider.
➜ When alarm are/is activated, ALM1 and/or
ALM2 are/is displayed (See
6).
• At the set alarm time, the CD or radio or
buzzer will switch on automatically.
Notes:
– Insert a CD if you select CD source as
alarm mode. CD will play from the first
track, or the track you have selected during
the alarm setting. If a CD is not loaded,
buzzer will auto turn on.
– When AJ3915 is in AUX mode (connecting
an external device), only buzzer will turn on
at the set time regardless of the CD or
RADIO alarm mode you have selected.
– If you have an alarm set in the radio or CD
mode, make sure you have adjusted the
volume loud enough to wake you up.
Switching off the alarm
There are three ways of switching off the
alarm. Unless you choose to cancel the alarm
completely, the DAILY ALARM RESET option
will be automatically kept activated from the
time your alarm first goes off.
Daily alarm reset
If you want the alarm to be stopped
immediately but also wish to repeat the alarm
call at the same time for the following day:
1 During the alarm call, press once
corresponding ALARM 1 or ALARM 2, or
press POWER.
➜ The corresponding ALM1 or ALM2 is still
displayed.
Repeat alarm
This will repeat your alarm call at 6-minute
intervals.
1 During the alarm call, press
REPEAT ALARM as indicated by the
arrow located at the top panel.
➜ The corresponding ALM1 or ALM2 is still
displayed, yet flashing.
Switching off the alarm completely
Press once or more corresponding
ALARM 1 or ALARM 2 until ALM1 or
ALM2 disappears.
Sleep
The CD clock radio has a built-in sleep timer,
which enables the set to be automatically
switched off during radio or CD playback
after a set period of time.
Setting the sleep time
1 Press POWER to switch to standby.
2 Set your timer by pressing repeatedly SLEEP
until the desired timer option appears.
➜ The set is auto switched on in the CD or
RADIO mode you have selected. And
“SLEEP” is displayed (See
6).
➜ Selections are follows (time in minute)
90=80=70=60=50=40=30=
20=10
3 The set will turn off automatically at the
selected time.
4 To cancel the timer function, either
press SLEEP once or more until “SLEEP”
disappears, or press POWER to switch to
standby.
➜ SLEEP disappears when sleep function is
cancelled.
Note:
– The sleep function does not affect your
alarm time setting(s).
Alarm Sleep
101 01
200 00