Porter-Cable H1000IS-W - Manual (Page 12)

12- ENG A01296
ASSEMBLE SKYHOOK
Tools needed:
1 - 1/2" socket or open end wrench
1 - 3/8" socket
1 - Torque wrench
Parts bag contains:
1 - Skyhook
2 - Upper brackets
5 - Screws, 5/16-18 x 7/8"
5 - Lockwashers
5 - Nuts, Whizlock 5/16"
1. Close fuel shut-off valve on tank
by turning clockwise until it
stops.
2. Remove four screws, and
washers securing fuel tank to
frame. Save screws and washers
for reassembly.
3. Carefully place fuel tank inside
frame rails as shown.
4. Place skyhook under frame as
shown.