Camera preset position – Panasonic WV-CU360C User Manual

Page 37

■

Camera Preset Position

There are two ways of presetting camera positions.
One is to use the camera setup menu of the combination
camera and the other is to operate the System Controller as
follows.

1. Select the desired system unit, monitor and camera.

2. Move the camera to a position you wish to preset, using

the joystick.

Adjust the picture using the following buttons.

• Iris (Open/Close)
• Focus (Far/Near)
• Zoom (Tele/Wide)

Note:

The memorized parameters may differ somewhat

depending on the camera type. Refer to the manual
included with the camera.

3. Type a number with the numeric buttons for the pre-

set position. The typed number appears in the
CAMERA section of the LED display.

4. Press the

HOME/PRESET/PROGRAM PRESET

button

while holding down the

PROGRAM/CAM SETUP/CAM

FUNCTION

button.

The position and its number are memorized for later
recall.

DOWN

MON

CAM

LOGOUT

ESC

SET

HOME/PRESET

PROGRAM

PRESET

CAM FUNCTION

CAM SETUP

PROGRAM