PYLE Audio PYD-710 - Manual (Page 6)

Pyle Pro Mixer Owner’s Manual – 9 8 – Pyle Pro Mixer Owner’s Manual
Using the “Punch”
Controls (PYD-720)
This featured control lets you smoothly and
quickly turn a playing source on and off, or
switch between the two different input sources
assigned to Crossfade Channel A and B.
The effect you get depends upon the position
of the Crossfader.
With the Crossfader at 100% Channel A (all
the way to the left), pressing the Channel A
Punch Button will mute the Channel A material.
Similarly, with the Crossfader at 100% Channel
B (all the way to the right), pressing the
Channel B Punch Button will mute the Channel
B material.
Punch Control
With the Crossfader in the middle position, press the Channel A punch button and the Channel A
material will be subtracted from the mix, leaving only Channel B material. Likewise, press the Channel
B punch button and the Channel B material will be subtracted from the mix.
Troubleshooting
Your mixer should require very little maintenance. If you have problems, refer to the chart below
for possible solutions. If you cannot solve the problem, contact a qualified technician for assistance.
PROBLEM POSSIBLE SOLUTION
Hum from PHONO
• Check that the turntable’s ground wire (usually black or green) is
fastened securely to the GROUND SCREW on the mixer input
panel
No signal from an
audio input
source
• Check the control setting
• Check the connection between the mixer and the input source
Nothing works • Check the AC connection. Make sure the AC outlet is “live.”
• Check the power connection to the rest of the system
(receiver/amplifier, etc.)
Hum from other
source
• Make sure there are no low level inputs connected to the LINE
input jacks
Feedback is
present
• Move the microphone further away from the output speakers,
or use a directional microphone
Care and Maintenance
Your Pyle Pro Mixer is an example of superior design and craftsmanship. The following suggestions
will help you care for your mixer so you can enjoy years of use:
• Keep the mixer dry. If it gets wet, wipe immediately.
• Use the mixer only in well-ventilated installations.
• Handle the mixer gently and carefully - do not drop!
• Keep the mixer away from dust and dirt.
• Wipe occasionally with a damp cloth to keep it looking new. Do not use harsh chemicals, solvents
or detergents!
Please
complete
warranty
card,
detach
and
return
PYLE
PRO
Audio,
Inc.
1600
63rd
Street
Brooklyn,
NY
11204
Place Stamp
Here
All PYLE PRO products are carefully constructed and tested before
shipment. Units purchased in the USA are warranted to be free of
defects in material and workmanship for two (2) years from the date
of purchase. This warranty is limited to the original retail purchaser
of the mixer.
Should the unit fail due to factory defects in material or workmanship,
your unit will be repaired or replaced at the sole discretion of PYLE.
To obtain warranty service, you must first call our Consumer Return
Hotline at (718) 236-6948 to obtain a Return Authorization Number.
This R.A. # must appear on the outside of your package and on all
paperwork relating to your return.
When returning the unit to us for warranty service, it must be carefully
packed and shipped, prepaid, to:
R.A.#: _____________
PYLE PRO Service Center
1600 63rd Street
Brooklyn, NY 11204
You must also include the following items with your return:
• A copy of your sales receipt or other proof of purchase
• A brief letter, indicating the problem you are experiencing with
the product
• Include in your letter your return address, daytime phone number
and R.A. number
• Also include a check or money order for $15.00 for return
shipping, handling and insurance, or provide your Visa/MC number with
expiration date.
Our obligation under this warranty is limited to the repair or replacement
of the defective unit when it is returned to us prepaid. This warranty
will be considered void if the unit was tampered with, improperly
serviced or subject to misuse, neglect or accidental damage.
Limited Warranty
Specifications
PYD710/720
Input Sensitivity/Impedance
Mic
Phono 1-2
Line 1-4
Output Level
Main Out
Record
Frequency Response
S/N Ratio (at 1 kHz)
Mic
Phono
Line
1.5 mV/600 Ohms
3.0 mV/50K Ohms
150.0 mV/27K Ohms
2.0 V/10-kOhms
120mV/10-kOhms
20Hz – 20kHz +/- 3 dB
55 dB/1.5mV input
65 dB/3.0mV input
70 dB/150.0 mV input
Distortion
Mic
Phono
Line
Tone Control
Treble
Bass
Talkover Attenuation
Power Source
Dimensions, inches
(mm)
Weight, lbs (kg)
0.50%
0.08%
0.05%
10kHz; +/-10dB
100Hz; +/-10dB
-16dB
120 VAC, 60Hz/230 VAC, 50 Hz
Model PYD-170:
7.5 x 3.4 x 8.7
(190 x 86 x 220)
Model PYD-720:
8.7 x 3.4 x 10.0
(220 x 86 x 254)
Model PYD-710/PYD-720
4.4 (2.0)/5.5 (2.5)