Mp6600 – Profile MP6600 User Manual

Page 15

TUNING CONTROLS - Use the up and down buttons to make the
following adjustments

SELECT STATIONS - Press and immediately release a tune button or
to move a radio frequency number down or up one step. Press and hold a
tune button or for several seconds to seek to the next clear
station.

SKIP TRACKS - Press a tune button or to move to the previous or
the next track on the CD. The Track number will show on the display.

FAST FORWARD AND FAST REVERSE - Press and hold button or
to fast forward or fast reverse through a song on the CD. The CD play
starts when you release the tune button.

PRESET STATIONS - There are six number buttons to store and recall stations for each
band.

STORING A STATION - Select a band (if needed) as explained in . Select a
radio station you wish to store. Select a preset numbered button, press and hold the
preset button for a few seconds till you hear a beep indicating the station has been
stored.

RECALL A STATION - Select a band (if needed) as explained in . Select a preset
numbered button.

REPEAT - Press the “REPEAT” button to continuously play the current song. Press a
second time to stop the repeat feature.

CD SCAN - Press the “CD SCAN” button to play several seconds of each track of the
current disc. Press a second time to stop intro and listen to the track.

SHUFFLE - Press the “SHUFFLE” button to play all tracks of the current disc in random
sequence. Press a second time to stop random play.

AUTOMATIC STORING AND PROGRAM SCANNING

AUTOMATIC STORING - Press and hold the “AMS/MU” button for several seconds
to activate the automatic storing function. Once activated, the radio starts
searching for the next frequency in the local mode and stores the clear radio
stations into the preset memory. If after searching in the local mode the radio does
not find six clear stations, then it will repeat the search in the distance mode. After
completion, the radio will change back to the preset mode.

PRESET SCANNING - Press the “AMS/MU” button shortly to activate the preset
scanning function. During the scanning, it will stop at every stored station for several
seconds and the number of the channel being scanned flashes on the display. Press
the “AMS” Button a second time to stop scanning.

MP6600