ProForm PFTL99806.4 - Manual (Page 18)

18
HOW TO OPERATE THE PERSONAL TELEVISION
IMPORTANT: Before operating the television, you
must connect a 75 ohm CATV cable to the 75 ohm
terminal on the treadmill, a VCR or DVD player to
the three audio/video RCA jacks, or a personal
audio/video player to the audio/video jack below
the television on the console. See page 12 for in-
structions.
Follow the steps below to operate the television.
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page
15.
2. Press the TV button to select a television
source or the Console mode.
When the key is inserted, the television will auto-
matically turn on. Select a television source or the
Console mode by pressing the TV button repeat-
edly.
If you have connected a 75 ohm CATV cable to the
75 ohm terminal on the treadmill, select the Tuner
source. If you have plugged a DVD player or VCR
into the three audio/video RCA jacks, select the
Input 1 source. If you have plugged a personal
audio/video player into the audio/video jack below
the television on the console, select the MP3
source. If you do not wish to use the television, se-
lect the Console mode.
3. Press the Channel buttons to select the de-
sired cable channel.
Note: Complete this step only if you are using ana-
log cable. Otherwise, change channels through an
external source such as your cable box or your
VCR.
When the television is turned on, the screen will
show the last cable cable channel that was se-
lected. To select a different channel, press the
Channel (Chan) buttons. The selected cable chan-
nel number will appear on the screen for a few sec-
onds. Note: The television is equipped with a chan-
nel memorizing function that allows you to go di-
rectly from the current channel to the next channel
saved in memory. Before channels can be selected
in this way, they must be saved in the television’s
memory. See HOW TO USE THE INFORMATION
MODE on page 19.
4. Press the Volume buttons to adjust the volume.
When either Volume (Vol) button is pressed, the
volume level indicator will appear on the screen for
a few seconds.
To use earphones or headphones (not included),
plug them into the headphone jack beside the key
on the console.
HOW TO USE THE STEREO SOUND SYSTEM
To play music or audio books through the console’s
stereo speakers, you must connect your MP3 player or
CD player to the console. Locate the audio/video jack
below the television on the console, and plug it into a
jack on your MP3 player, CD player, or personal video
player.
Make sure that the audio/video cable is fully
plugged in.
Next, press the Play button on your MP3 player, CD
player, or personal video player. Then, adjust the vol-
ume on your MP3 player, CD player, or personal
audio/video player. You can also adjust the volume on
the console by pressing the Volume increase and de-
crease buttons.
If you are using a personal CD player or DVD player
and the CD or DVD skips, set the CD player or DVD
player on the floor or another flat surface instead of on
the console.