Peavey ESCORT 3000 - Manual (Page 12)

12
NOTE: For Safety, be sure to fully open the mixer stand and place it on a level surface.
Fig. 1
Fig. 2 Fig. 3
Optional Accessories (available from Peavey dealers)
Microphone stand(s)
Additional microphones and cables
Microphone wind screens
Additional speaker cables in various lengths
Additional speaker stands in various heights
Audio cables for CD and tape
Optional Mixer Stand Assembly:
Remove the mixer stand from the case. The mixer stand consists of three parts: two pairs of legs and the stand cross-members (Fig. 1). Hold
the stand cross-member with the leg sockets together as shown (Fig. 2). Fully insert one set of legs into the cross-members (Fig. 3). Still
holding the cross members together, set the legs on the floor and insert the second pair of legs. If you need to move the stand, carry it folded
by holding the legs.