Peavey DJS 1800 - Manual

Portable
DJ System
SPECIFICATIONS
Enclosure:
1800 System
Frequency Response:
Low Frequency Limit (-3 point):
40 Hz
Low Frequency Limit
point):
35 Hz
Power Handling:
350 watts continuous (37.4 volts RMS)
600 watts program
Sound Pressure Level 1 Watt at 1
Meter Swept Sine Input in
Environment:
98
Maximum Sound Pressure Level:
121
Radiation Angle Measured at -6
Point of Polar Response:
Horizontal: 96”
Vertical: 92”
k-5
Horizontal: 73”
Vertical: 74”
5 k-16
Horizontal: 97”
Vertical: 46”
Directivity Factor, (Mean):
6.87; -4.6
Directivity Index Di (Mean):
8.37 -3
Transducer Complement:
DJS 1800 Sub:
4 ohm Black
woofer with impregnated cone.
DJS 1800:
Peavey 22XT titanium compression
driver loaded onto a CH-3 H x
V horn and a 4 ohm 15435
Sheffield@ midwoofer.
Box Tuning Frequency (Fbox):
DJS 1800 Sub: 55 Hz
DJS 1800 Closed Box (fc): 80 Hz
Crossover Frequency: Enclosure Materials and Finish:
DJS 1800 Sub: 200 Hz MDF cabinet, braced internally,
DJS 1800: 1200 Hz covered with durable black carpet, and
Crossover Type:
Internal Passive
reinforced with high impact polymer
corners
Electrical Crossover Slope:
Subwoofer: 12 low pass (6
octave high output)
Satellite: 12
for satellite internal
and low pass
Mounting:
DJS 1800 Sub: Internal mounting block,
guide pole, and stand adaptor plate
DJS 1800: Bottom-mounted
stand
adaptor, DJS 1800 pole stand
Impedance (Nominal):
4 ohms
Dimensions:
DJS 1800 Sub:
22.5” W x 30.5” H x 25.75” D
Impedance (Minimum):
Input Connections:
DJS 1800 Sub: One female full range
input and one female high pass
output
DJS 1800: Two female full range
inputs in parallel, one female biamp
low input and one female biamp high
input
(57.2 cm W x 77.5 cm H x 65.4 cm D)