Pioneer Super Tuner III D AVH-P5950DVD - Manual (Page 15)

English
Français
Italiano
Nederlands
PyÒÒÍËÈ
14
ENG/MASTER 96 INST
15
2. Tighten two screws on each side.
Use any of binding screws (4 mm
× 3
mm), binding screws (5 mm
× 6 mm)
or flush surface screws (5 mm
× 6
mm), depending on the shape of screw
holes in the bracket.
Fastening the front panel
If you do not plan to detach the front
panel, the front panel can be fastened
with supplied screws.
• Fix the front panel to the unit
using screws after removing the
trim ring.
Installing the remote control unit
When not using the remote control
unit, secure it with velcro tape to pre-
vent it from moving.
• Thoroughly wipe off the surface
before affixing the velcro tape.
Velcro tape (small)
(hard)
Velcro tape (small)
(soft)
Remote control unit
Screws
Screw
Dashboard or
Console
Factory radio mounting
bracket