Specifications, Techno tidbits & problem-solving, Miscellaneous – Pioneer VSX-27TX User Manual
Page 78: Furnished parts
78
Techno Tidbits & Problem-solving
Specifications
VSX-27TX :
Amplifier Section
Continuous average power output of 120
watts* per channel, min., at 6 ohms, from 20
Hz to 20,000 Hz with no more than 0.09 %**
total harmonic distortion (front).
VSX-26TX:
Continuous average power output of 100
watts* per channel, min., at 8 ohms, from 20
Hz to 20,000 Hz with no more than 0.09 %**
total harmonic distortion (front).
VSX-24TX :
Continuous average power output of 90
watts* per channel, min., at 8 ohms, from 20
Hz to 20,000 Hz with no more than 0.09 %**
total harmonic distortion (front).
VSX-27TX :
Continuous Power Output
Front ......................... 120 W + 120 W (20-20 kHz, 0.09 %, 6
Ω
)
Center ...................................... 120 W (20-20 kHz, 0.09 %, 6
Ω
)
Rear .......................... 120 W + 120 W (20-20 kHz, 0.09 %, 6
Ω
)
VSX-26TX :
Continuous Power Output
Front ......................... 100 W + 100 W (20-20 kHz, 0.09 %, 8
Ω
)
Center ...................................... 100 W (20-20 kHz, 0.09 %, 8
Ω
)
Rear .......................... 100 W + 100 W (20-20 kHz, 0.09 %, 8
Ω
)
VSX-24TX :
Continuous Power Output
Front ............................. 90 W + 90 W (20-20 kHz, 0.09 %, 8
Ω
)
Center ........................................ 90 W (20-20 kHz, 0.09 %, 8
Ω
)
Rear .............................. 90 W + 90 W (20-20 kHz, 0.09 %, 8
Ω
)
Input (Sensitivity/Impedance)
PHONO MM ......................................................... 4.7 mV/47 k
Ω
VCR 1, VCR 2, DVD/LD, TV/SAT, VIDEO, CD, MD/TAPE 1, TAPE 2
........................................................................ 335 mV/47 k
Ω
Phono Overload level (T.H.D.0.1 %, 1kHz)
PHONO MM .................................................................. 120 mV
Frequency Response
PHONO MM ....................................... 20 Hz to 20,000 ± 0.3 dB
VCR 1, VCR 2, DVD/LD, TV/SAT, VIDEO, CD, MD/TAPE 1, TAPE 2
....................................................... 5 Hz to 100,000 Hz dB
Output (Level/Impedance)
VCR 1 REC, VCR 2 REC, MD/TAPE 1 REC, TAPE 2 REC ..... 335 mV/2.2 k
Ω
Tone Control
BASS ................................................................. ± 6 dB (100 Hz)
TREBLE .............................................................. ± 6 dB (10 kHz)
LOUDNESS ............................................ +3 dB (100 Hz/10 kHz)
Signal-to-Noise Ratio (IHF, short circuited, A network)
PHONO MM ..................................................................... 80 dB
VCR 1, VCR 2, DVD/LD, TV/SAT, VIDEO, CD, MD/TAPE 1, TAPE 2
................................................................................... 101 dB
Signal-to-Noise Ratio [EIA, at 1 W (1 kHz)]
PHONO MM ..................................................................... 80 dB
VCR 1, VCR 2, DVD/LD, TV/SAT, VIDEO, CD, MD/TAPE 1, TAPE 2
..................................................................................... 83 dB
+0
–3
+0
–3
*
Measured pursuant to the Federal Trade Commission’s Trade
Regulation rule on Power Output Claims for Amplifiers.
** Measured by Audio Spectrum Analyzer.
VIDEO Section
Input (Sensitivity/Impedance)
VCR 1, VCR 2, DVD/LD, TV/SAT, VIDEO ................... 1 Vp-p/75
Ω
Output (Level/Impedance)
VCR 1, VCR 2, MONITOR ...................................... 1 Vp-p/75
Ω
Frequency Response
VCR 1, VCR 2, MONITOR ....................... 5 Hz to 10 MHz dB
Signal-to-Noise Ratio .......................................................... 65 dB
FM Tuner Section
Frequency Range ...................................... 87.5 MHz to 108 MHz
Usable Sensitivity ................. Mono: 13.2 dBf, IHF (1.3 µV/75
Ω
)
50 dB Quieting Sensitivity .................................. Mono: 20.2 dBf
Stereo: 38.6 dBf
Signal-to-Noise Ratio ............................ Mono: 73 dB (at 85 dBf)
Stereo: 70 dB (at 85 dBf)
Distortion .................................................... Stereo: 0.5 % (1 kHz)
Alternate Channel Selectivity ............................. 60 dB (400 kHz)
Stereo Separation ................................................... 40 dB (1 kHz)
Frequency Response ............................. 30 Hz to 15 kHz (± 1) dB
Antenna Input ................................................... 75
Ω
unbalanced
AM Tuner Section
Frequency Range ........................................ 530 kHz to 1,700 kHz
Sensitivity (IHF, Loop antenna) .................................... 350 µV/m
Selectivity ............................................................................ 25 dB
Signal-to-Noise Ratio .......................................................... 50 dB
Antenna ................................................................... Loop antenna
Miscellaneous
Power Requirements .......................................... AC 120 V, 60 Hz
VSX-27TX :
Power Consumption ............................................. 460 W, 630 VA
Power Consumption in Standby mode ............................. 1.0 W
AC Outlet SWITCHED (
×
2) ................... Total 100 W (0.8 A) MAX
AC Outlet UNSWITCHED .............................. 100 W (0.8 A) MAX
Dimensions ............................... 420 (W)
×
173 (H)
×
470 (D) mm
16-9/16 (W)
×
6-13/16 (H)
×
18-1/2 (D) in
Weight (without package) .............................. 14.7 kg (32 lb 7 oz)
VSX-26TX/24TX :
Power Consumption ............................................. 400 W, 550 VA
Power Consumption in Standby mode ............................. 1.0 W
AC Outlet SWITCHED (
×
2) ................... Total 100 W (0.8 A) MAX
AC Outlet UNSWITCHED .............................. 100 W (0.8 A) MAX
Dimensions ............................... 420 (W)
×
173 (H)
×
470 (D) mm
16-9/16 (W)
×
6-13/16 (H)
×
18-1/2 (D) in
Weight (without package) .............................. 14.1 kg (31 lb 1 oz)
Furnished Parts
FM Antenna ................................................................................. 1
AM Loop Antenna ....................................................................... 1
Dry Cell Batteries (SIZE “AA” (IEC LR6)) ................................... 2
Remote Control Unit ................................................................... 1
Operating Instructions ................................................................ 1
NOTE:
Specifications and the design are subject to possible modifications
without notice, due to improvements.