Pioneer VSX-27TX - Manual (Page 19)

19
SET UP
PREP
ARA
TION
Displays & Controls
VSX-27TX
@ LOUDNESS button
(See p.42)
Switches the LOUDNESS mode on or off.
# MIDNIGHT button
(See p.41)
Switches the MIDNIGHT LISTENING mode on or off.
$ DIGITAL NR button
(See p.41)
Switches the DIGITAL NR on or off (STEREO mode
only).
% SIGNAL SELECT button
(See p.40)
Use to select the type of signal being input into the
receiver.
SIGNAL SELECT repeatedly to select one of the
following:
ANALOG : To select an analog signal.
DIGITAL : To select a optical or coaxial digital signal.
AC-3 RF : To select an AC-3 RF signal (VSX-27TX
only).
AUTO : This is the default. If there are both analog
and digital input signals, the receiver automatically
selects the digital signal (VSX-27TX only).
^ FL DIMMER button
(See p.43)
Use to adjust the brightness of the main display.
& TUNER CONTROL button
(See p.44-47)
CLASS : Press repeatedly to switch the preset station
classes.
FM/AM : Press to select the AM or FM band.
TUNING –/+ : Use to manually tune to radio stations.
* STATION –/+ buttons
(See p.46-47)
Use to choose programmed radio stations.
( MEMORY button
(See p.46)
Press to start the memorization of a preset station.
) MPX button
(See p.44)
Press to switch between auto stereo and MONO
reception of FM broadcasts. When the broadcast
signal is weak, selecting MONO will improve the
sound quality.
_ TAPE 2 MONITOR button
(See p.60)
Selects the tape deck (MD recorder, etc.) connected to
the TAPE 2 MONITOR inputs/outputs. Allows
monitoring of a recording as it's being made.
+ INPUT ATT button
Use to lower the input level of an analog signal that is
too powerful, thus causing the receiver to distort (the
overload indicator will light furiously).
¡ TREBLE (–/+) button
(See p.43)
Use to adjust the high frequencies.
™ BASS (–/+) button
(See p.43)
Use to adjust low frequencies.
£ SPEAKERS (A/B) buttons
A is the primary setting. It plays all speakers hooked
up to the A system. A & B setting only plays the front
speakers of both the A & B systems and the sub-
woofer. Multi channel sources will be down-mixed to
these speakers so no sound will be lost. B setting
only plays the front speakers connected to the B
system and multi channel sources will be down-
mixed to these two speakers.
¢ VIDEO INPUT jacks (See p.9)
S-VIDEO : Video input for connecting a video camera
(etc.), that has an S-Video out.
VIDEO / AUDIO (L/R) : Video input for connecting a
video camera, etc. that has standard video/audio
outputs.
∞ PHONES jack
Connect headphones for private listening (no sound
will be heard through the speakers)
3 3 3 3 A A+B OFF B
STANDBY/ON DSP
MODE
MULTI-ROOM
& SOURCE
INPUT
SELECTOR
MASTER
VOLUME
MIN MAX
THX CINEMA ADVANCED STANDARD
PHONES
S-VIDEO
5-CHANNEL EQUAL POWER OUTPUT
VIDEO
EXTERNAL
DECODER IN
SIGNAL
SELECT FL
DIMMER
TAPE 2
MONITOR
DIRECT LOUDNESS MIDNIGHT
DIGITAL
NR CLASS FM/AM
TUNER CONTROL
MEMORY MPX INPUT ATT SPEAKERS
- TUNING +
- STATION + - TREBLE + - BASS +
L AUDIO R
VIDEO INPUT
CONTROL
VIDEO VCR 1 VCR 2 DVD/LD TV/SAT CD MD/TAPE1 TUNER PHONO
STANDBAY
AUDIO/VIDEO MULTI-CHANNEL RECEIVER
STEREO
/DTS
N∫m¿<≥ım
~ ! @ # $ % ^ &
* ( ) _ + ¡ ™ £ ¢ ∞