Philips Clon99-BKI - Manual (Page 6)

6
SMART
PLUG
75 Ω
ANT/
CABLE
EXTERNAL
SPEAKER
PHILIPS
SMARTLOADER 99
Copyright PCEC 1999
System Version D.0
PN 3135 019 01681
PRESS POWER TO BEGIN
Philips SmartLoader 99
System Version D.0
1 - Read TV
2 - Write TV With Settings
3 - Write TV Without Settings
4 - Erase SmartLoader Memory
5 - System Test
6 - Exit SmartLoader
Stored Memory Type 01, 04
Philips SmartLoader 99
System Version D.0
1 - Read TV
2 - Write TV With Settings
3 - Write TV Without Settings
4 - Erase SmartLoader Memory
5 - System Test
6 - Exit SmartLoader
Read? Press 0 to confirm
Philips SmartLoader 99
System Version D.0
1 - Read TV
2 - Write TV With Settings
3 - Write TV Without Settings
4 - Erase SmartLoader Memory
5 - System Test
6 - Exit SmartLoader
Reading Block 23 of 63
Philips SmartLoader 99
System Version D.0
1 - Read TV
2 - Write TV With Settings
3 - Write TV Without Settings
4 - Erase SmartLoader Memory
5 - System Test
6 - Exit SmartLoader
Finished Reading Memory
1
2
-
VOL CH
1 2 3
4 5 6
7 8 9
0
SELECT
M
SLEEP
A/CH
MUTE
POWER
+
CC
RECALL
RESET
CH GDE
GUEST SETUP SETUP
TV TV DCM
A B C D
E F G
1
2
3
4
5
3
6
READ MEMORY
Once the memory has been erased, the
Clon99-BK SmartLoader is ready to
read a television’s memory. Follow the
steps below to complete the procedure.
With the Clon99-BK SmartLoader
on-screen display showing, press the
POWER button on the remote control.
The Setup Menu will appear. Press
the Number 1 button on the Remote
Control to select the first option “Read
TV.”
The on-screen display will ask,
“Read?” Press the 0 button to confirm
and begin the Read procedure.
The on-screen menu will reading
blocks of data on the bottom of the dis-
play.
Once the “Read” procedure is com-
plete, “Finished Reading Memory” will
appear at the bottom of the display.
Disconnect the SmartLoader cable
from the back of the TV to complete
the “Read TV” operation or another
Numbered button to choose a different
option.
BEGIN
R
EADING
M
EMORY OR
D
ATA