Philips DVD707/781 - Manual (Page 22)

23
English
¶ Setup the item as follows:
– Use the 1 2 keys to highlight the item VIDEO in the top menu, then
press the SELECT key to open the first level submenu.
– Use the 34 keys to select TV SHAPE item.
– Press the SELECT key to open the second level submenu.
– Use the 34 keys to select your preferred TV shape.
– Press the SELECT key to confirm the change.
TV system
¶ There are two major television systems, PAL (popular in Asia) and
NTSC (National Television Systems Committee-popular in America).
Most of TV sets can play with the two systems. Set this feature according
to the system of your TV (PAL,NTSC or AUTO).
¶ Setup the item as follows:
– Use the 1 2 keys to highlight the item VIDEO in the top menu, then
press the SELECT key to open the first level submenu.
– Use the 34 keys to select TV SYSTEM item.
– Press the SELECT key to open the second level submenu.
– Use the 34 keys to select your preferred TV system.
– Press the SELECT key to confirm the change.
Audio output
¶ This feature is applicable to either analog audio output or digital audio
output.
¶ The item of “Dolby D” only adapt to DVD discs and the item OTHER
adapt to the “Others”. You can setup the relevant item as follows:
– Use the 1 2 keys to highlight item AUDIO in the top menu, then press
the SELECT key to open its submenu.
– Press the 34 keys to highlight the selection and press the SELECT key
to change it.
[Dolby D]
[Analog out]
– [2CH]
If you choose 2CH stereo receiver or Dolby
digital decoder instrument, you must setup audio
output as 2CH.
– [OFF] When you highlight this item, analog out will be
close.
[Digital output] Such option as [RAW] and [PCM] will be
supplied.
[Others]
[Analog out] Such option as [2CH], [OFF] will be supplied.
You can select the proper option.
[Digital output] Such option as [RAW], [PCM], [OFF] will be
supplied.
– Press the SETUP key to activate it and quit the from the feature.
NOTE:
– The digital output of DTS discs must be setup as RAW.
Setup Menu